NTFS on external with multiman?

Discussion in 'PS3 - Hacking & Homebrew' started by Hking0036, Nov 25, 2017.

  1. Hking0036
    OP

    Hking0036 GBAtemp Fan

    Member
    5
    Sep 15, 2015
    United States
    I can't find anything consistent on this anywhere. I formatted my external HDD NTFS and I did the USB.CFG (even though I'm told it might not need that anymore)? and it shows up under the Multiman file manager but refuses to show any games. Is there any way around this or is it just a mess? I've done the pfs driver switch whatever and prepNTFS and it refuses to do anything. Webman doesn't seem to either. I've read that I have to have a /ps3iso/ directory, but all my games are in folder format. Regardless, I moved them from /games/ to /ps3iso/ and still nothing is seen.

    When I switch it from MMCM to multiman mode it can show the USB drive on the bottom but can't read from it or rip discs to it. When I look at the file manager in Webman, it shows it mounted as dev_NTFS0 but won't show any games on it.

    EDIT: To get webman/multiman to read PS3 games on NTFS drives, you need to have them in ISO format instead of folder, and in /PS3ISO/ instead of in /GAMES/ like multiman normally does. You can then use prepNTFS to update your list. If you have webman MOD installed, it will automatically do a prepNTFS on boot.
     
    Last edited by Hking0036, Nov 28, 2017
  2. SG854

    SG854 Logan

    Member
    9
    Feb 17, 2017
    Romania
    I need help with this too. I formated my USN to ntfs, created a usb config, and multiman is not reading my drive.

    I used this guide for ntsf support but its not working.
    http://broadcastquran.com/threads/multiman-beginners-guide.291170/

    — Posts automatically merged - Please don't double post! —

    @Cyan Read my above post.

    I was reading your guide and can't get ntfs to work.
     
    Last edited by SG854, Nov 26, 2017
  3. Cyan

    Cyan GBATemp's lurking knight

    Global Moderator
    21
    Oct 27, 2002
    France
    Engine room, learning
    my guide is a little old.
    I don't know if there's a new method to get NTFS working or if it's still the only way.
    what I remember is that the PFS driver wasn't very stable/compatible with all drives.

    I also don't remember if it works with multiple partitions. So be sure your drive have only one partition, and that your drive is not using encryption (seagate/WD love to provide program to encrypt their drives, but it works only on windows)


    Sorry, I didn't touch my PS3 since 2011 (I think).
    I just got back active here since the new 4.82 hacking method, but haven't tried it yet.
     
    Last edited by Cyan, Nov 26, 2017
  4. SG854

    SG854 Logan

    Member
    9
    Feb 17, 2017
    Romania
    Only one partition and i'm using a 120gb seagate hard drive from 2007. I formatted using Windows 10 default formatter.
     
  5. Cyan

    Cyan GBATemp's lurking knight

    Global Moderator
    21
    Oct 27, 2002
    France
    Engine room, learning
    Like Hking said, I'm sure the USB.CFG is not needed anymore, and there's another way to read NTFS (still not write, or launch game from it?)
    What I remember when I wrote my guide is that it could be used only in file explorer mode, read only, as a way to move big files from external to internal only. It couldn't be used to play from it.

    maybe it's different now.
    You'll have to wait for someone else's help here, sorry. (I'll learn at the same time)
     
  6. SG854

    SG854 Logan

    Member
    9
    Feb 17, 2017
    Romania
    Yes thats what I wanna use it for to install ps2 games bigger than 4gb.
     
  7. vb_encryption_vb

    vb_encryption_vb That hardmod guy....

    Member
    7
    Nov 21, 2015
    United States
    Acworth, GA
    Use webman if you want NTFS support.
     
  8. Cyan

    Cyan GBATemp's lurking knight

    Global Moderator
    21
    Oct 27, 2002
    France
    Engine room, learning
    until you get the solution, you can split the file and use a FAT32 partition.
    MultiMAN file explorer will automatically join the split files when transferred to internal.

    Oh, it can launch games directly from NTFS, good :)
    thanks for the answer
     
  9. SG854

    SG854 Logan

    Member
    9
    Feb 17, 2017
    Romania
    Im using webman, how do you enable ntsf supports.

    I have a spilt ul. file, how do I combine these?
     
  10. vb_encryption_vb

    vb_encryption_vb That hardmod guy....

    Member
    7
    Nov 21, 2015
    United States
    Acworth, GA
    I did not actually watch this video, but this should be good enough.

     
  11. Cyan

    Cyan GBATemp's lurking knight

    Global Moderator
    21
    Oct 27, 2002
    France
    Engine room, learning
    to do the split file method, first you need your full iso game on PC.
    use one of the splitters to cut your files in multiple .666 files
    put them all on your fat32 external drives
    mount your partition in multiman file explorer
    choose "copy to internal", and it will be unsplit automatically.

    in my guide, I provided few splitters names. I don't know if the links are still good, I didn't check that for a long time.
     
  12. azoreseuropa

    azoreseuropa GBAtemp Guru

    Member
    9
    Nov 6, 2002
    Portugal
    Proud to be Portuguese 100%!
    I dont need the splitters for full iso game at all. Yes I am using NTFS on external hard drive running in WebMAN MOD and make sure cobra is enable to do that. The ISO are better than PS3 folders. By the way, my PS3 is running Rebug CFW. Loved Rebug for over 6 years. :)
     
  13. SG854

    SG854 Logan

    Member
    9
    Feb 17, 2017
    Romania
    I have a PS2ISO folder on the root of my ntsf, ps2 games in iso format and nothing is showing up on webman. I have cobra too.
     
  14. Hking0036
    OP

    Hking0036 GBAtemp Fan

    Member
    5
    Sep 15, 2015
    United States
    It's okay! Evidently, NTFS only supports ISO format and you have to have a proper USB.CFG in the multiman folder, at which point webman and multiman can both see them fine. It seems to work fine with my hard drive but ISO is just a little inconvenient. Unfortunately, I have a 2TB external and 120GB internal so I'm tryin gto keep as much off of the internal as I can.
     
    Cyan likes this.
  15. SG854

    SG854 Logan

    Member
    9
    Feb 17, 2017
    Romania
    How is the format for your cfg file? I put it in the multiman folder but nothing shows up.
     
  16. Hking0036
    OP

    Hking0036 GBAtemp Fan

    Member
    5
    Sep 15, 2015
    United States
    the USB CFG has to be your Vendor ID and PID, then volume seperated by colons.
    For example, 0x0000:0x0000:1 is all you should have in your USB CFG. Then you should restart Multiman.

    To get it, go to device manager, find your USB hard drive, go to properties>details and drop down to parent.
     
    Last edited by Hking0036, Nov 27, 2017
  17. SG854

    SG854 Logan

    Member
    9
    Feb 17, 2017
    Romania
    Thats exactly what I did but nothing.
     
  18. Hking0036
    OP

    Hking0036 GBAtemp Fan

    Member
    5
    Sep 15, 2015
    United States
    multiman can't view any games in folder format on NTFS drives. Make sure your PS3 games are in ISO format and in the /PS3ISO/ folder instead. You should be able to find your drive in the multiman file browser if you go to pfs driver and look for usb_pvd.
     
  19. SG854

    SG854 Logan

    Member
    9
    Feb 17, 2017
    Romania
    Im trying to view ps2 iso but it just gets stuck on a never ending loading loop.

    — Posts automatically merged - Please don't double post! —

    Ok so I was able to use iris man to copy to internal ps3 hdd for external usb, and now ps2 game runs fine.
    Now I gotta figure out how to run them off of external.
     
  20. azoreseuropa

    azoreseuropa GBAtemp Guru

    Member
    9
    Nov 6, 2002
    Portugal
    Proud to be Portuguese 100%!
    I prefer webMAN MOD over Irish. To make it easier.. Make sure webMAN MOD and Cobra are the latest update and you will need PrepNTFS to scan NTFS external hard drive first then your webMAN MOD's game list should show up. I dont use USB CFG at all. You dont need it.

    prepNTFS 1.17 - GitHub
     
    Last edited by azoreseuropa, Nov 27, 2017
    CymraegAce and Cyan like this.
Loading...